Precision-machined runners mounted on sealed ball bearings.
Available in three basic range with further adjustment of flange width.
Anti Corrosive Powder coated finish.
In built control panel ready to use.
DIMENSIONS, WEIGHTS AND PERFORMANCE DATA
Electric
Capacity kg.
1000
3000
Inside of
Wheel flanges
mm
Range 1
58-150
90-160
Range 2
150-210
160-220
Range 3
210-305
220-305
A Seat of susp.
plate
to runner tread
Range 1 & 2 mm
89
110
Range 3 mm
129
155
B runner tread
width
mm
65
90
C runner tread
width
mm
25
30
D runner centres
mm
128
157
E underside of
runner to suspension plate
28
28
F underside of
runners to top of Control Panel
mm
120
120
G beam flange to
Panel end
mm
287
287
H underside of
runner to top of motor
138
138
J track centreline
and to motor
Range 1
track
widths J mm
58-150
350-390
90-160
360-395
Range 2
track
widths J mm
150-210
390-420
160-220
395-425
Range 3
track
widths J mm
210-305
420-470
220-305
425-470
K depth of plate
Range 1,2 & 3
mm
21
34
L overall length
mm
238
290
M underside of
runner to flange (push)
mm
75
105
N underside of
runner to gear tip (geared)
mm
90
115
Minium rados of track
curve mm
1500
1500
Electric travel
Weight in Kg
Range 1
22
31
Range 2
23
33
Range 3
26
38
Speed M/Min.
Motor HP/RPM
10
0.25/1500 rpm
10
0.25/1500 rpm
Data Tolerance ±10%
1.
Nominal 1.5 mm clearance
to be allowed from edge of track flange to inside of wheel flange (3mm overall on both side)
2.
Bottom of Pendent is 500
mm from ground level.
3.
Pusher bar fixing holes
provided in all models.
4.
Buffers available as an option.
5.
Overall width of travel
trolleys = J + (1/2 x track width) + G. Units when using the narrower track widths the crossbolt adjusting washers are to be assembled such that the end of the crossbolt is clear of the panel.
